No WiFi · No subscription

Know the instant your power goes out.

GridWatchdog plugs into any outlet and emails you typically about 20 seconds after the power drops — over its own cellular connection. It keeps working when your WiFi, router and internet are all dead.

$299 one time · 5 years of cellular service included · no monthly fee

Most monitors have the same flaw

They report over your WiFi. When the power goes out, so does your router — and the device goes silent exactly when you need it.

🧊

A freezer full of food

A summer outage while you're away can quietly cost hundreds of dollars in spoiled groceries.

🏚️

A second home or cabin

A long outage while nobody's there means a full fridge and a cold house. Know the day it happens, not the day you arrive.

👵

A parent living alone

Know the moment their power drops, so you can check in — even from across the country.

🖥️

A home lab or office

Know your UPS started draining while there's still time to shut things down cleanly.

Set up in about five minutes

No app to install. No account to create. No hub, no wiring.

1

Plug it in

Any standard outlet near the thing you care about. The display lights up immediately.

2

Name it, add your email

Join its WiFi from your phone, type "Kitchen" and your email address, tap Activate.

3

Forget about it

It quietly checks in over cellular. You only hear from it when something actually happens.

⚡

Alerts in about 20 seconds

The device runs on its own battery, so it reports the outage right away — typically about 20 seconds from the cut to your inbox.

📡

Its own cellular link

LTE-M, independent of your internet. Five years of data is included in the purchase price.

🔋

Battery backup

A rechargeable cell keeps it reporting through the outage, then lets you know quickly once power returns.

🔇

No nuisance alerts

Blips shorter than 5 seconds are ignored. If a circuit keeps bouncing, filtered mode switches on by itself, and we can tune it remotely for you.

What it costs over five years

Most competitors charge monthly, forever. That adds up.

ProductDevicePer year5-year totalNeeds WiFi?
GridWatchdog$299$0$299No
MarCELL PRO$199$180$1,099No
CabinPulse~$145~$88~$585No
iSocket Pro$189~$55~$464No
Necto$200~$84~$452No
WiFi smart plug~$30$0~$30Yes — fails in an outage

Competitor pricing from public listings and may change. Necto's $200 includes its first two years of service; renewal runs $4.99–$9.99 a month depending on term — the total shown uses its $6.99 annual plan, and even its cheapest bi-annual rate lands near $380 over five years. GridWatchdog's $299 covers the full five years shown — after that, service renews for a modest one-time fee. A WiFi plug is listed for contrast: it stops reporting the moment your router loses power.

One price. Five years covered.

$299
one-time · free shipping in the US
  • GridWatchdog device with status display
  • 5 years of cellular service included
  • Rechargeable backup battery installed
  • Email alerts to you and an optional backup contact
  • Firmware updates delivered over the air
  • 1-year hardware warranty
Get notified at launch

After 5 years, service can be extended for a modest one-time fee — we'll contact you well before then.

Not yet shipping. Join the list and you'll hear first.

Questions

How does it work without WiFi?

There's a cellular modem inside, the same technology smart meters and trackers use. It connects to LTE-M networks directly, so it doesn't touch your router or internet at all.

Really no monthly fee?

Really. Five years of prepaid cellular service is built into the $299 purchase price. The device sends a few hundred bytes every half hour, so there's nothing metered and nothing to top up along the way.

What about other cellular monitors?

A few of them also use their own cellular connection and a backup battery, and they work — that part of the design isn't unique to us. The difference shows up after you buy. They're typically sold with a year or two of service bundled in, then charge around $7 a month to keep going, which lands near $450 over five years. Ours is $299 with five years included and no monthly bill at all. You also don't need an app or an account: current status is on the device's own display, and alerts go straight to your email.

How fast is the alert?

Typically about 20 seconds from the outage to an email in your inbox. If cellular is congested the device keeps retrying on its battery. And if a unit ever goes completely silent, our servers notice on their own — about 40 minutes after its last check-in, because a healthy unit on mains power checks in every half hour.

What if my power flickers constantly?

Some circuits blink several times an hour, and alerting on every one would just fill your inbox. If we see three interruptions within an hour we switch that device to filtered mode — brief blips still get recorded, but we only email you if the power stays out for about three minutes. We tell you in the email when this happens, it turns itself off after a quiet day, and there's a link to opt out if you'd rather hear about every single one.

What if the power is out for days?

It checks in frequently at first, then slows down to conserve power during a long outage. You'll get a second email quickly once power returns, with how long it was out.

Will short flickers spam me?

The device ignores any interruption shorter than 5 seconds. Anything longer gets an alert — unless the circuit has lost power three times within an hour, in which case filtered mode (above) takes over automatically. If you're on a rural line with frequent blips, email support@gridwatchdog.com and we'll tune the filter for your device remotely — it takes effect immediately.

Can I use several in one house?

Yes. Each device is completely independent with its own cellular connection and its own name in the alerts. There's no hub, so one failing never affects the others.

What happens after five years?

The device keeps working — you just renew the cellular service. We'll email you well before the five years are up with a renewal option at a modest one-time cost. There's no auto-billing and no surprise: if you do nothing, we'll tell you before anything stops.

Where does my data go?

The device reports its power status and outage times, plus what we need to keep it healthy: battery and charging state, cellular signal and network, its SIM and modem serial numbers, data usage, firmware version, and crash reports. It has no microphone, camera or location sensor, and never touches your home network. It's all stored on our servers so we can alert you and help troubleshoot. We never sell it. The complete list is in our privacy policy.

What GridWatchdog is not

GridWatchdog is a notification aid, not a life-safety device. Don't rely on it as the only thing standing between a power failure and harm.

Don't use it as your sole protection for refrigerated or frozen medication such as insulin, for medical equipment such as CPAP machines or oxygen concentrators, for sump or septic pumps, for animals that depend on powered heat, cooling or air, or for anything where an outage could hurt someone or destroy something you can't replace. Those situations need equipment designed and certified for the job: a monitored alarm, a UPS with a local audible alarm, or a generator with automatic transfer.

An alert can fail to arrive without warning: if your email is delayed, filtered to spam or bouncing, if there's no usable cellular signal at that outlet, if a long outage outlasts the battery, or if the device or our service fails. Alert timings are design goals, not guarantees. The card in the box carries the full wording.

Where it's headed

Today GridWatchdog emails you when the power drops, and can also post the same alerts to Discord, Slack or any HTTPS webhook you set up. Here's where alerting is going next — planned directions, not promises or dates.

🔗

One-click connect Exploring

Add to Slack or connect Discord in a single click, without pasting a webhook URL by hand.